Tip system

C245 tips: what fits, what they are good at, what to check

JBC's C245 cartridges fit the T245 handle and suit SMD and high-power work. What fits, how third-party C245 tips differ, and the 120 V options.

Also listed as T245, JBC C245, C245-compatible

We may earn a commission if you buy through links on this page, at no extra cost to you. Unless a page says otherwise, our picks come from published specifications and listing research, not hands-on testing. How we make money · How we research

Short answer

C245 is JBC's general-purpose cartridge range for its T245 handle: T245 is the handle, C245 the tip. JBC rates the T245 at 150 W peak and describes it as suited to both SMD work and high-power jobs such as ground-plane soldering. Several third-party stations take C245-format tips; they share the format, but JBC's figures do not apply to them.

Key facts

Original maker
JBC (T245 handle, C245 cartridges)[1][2]JBC also lists C245E and C245L cartridge ranges for the same handle.
Rated power
150 W peak (JBC T245 handle)[1][3]JBC's CDB station lists 175 W nominal and 130 W tool peak with the T245-A; delivered power depends on the control unit.
Handle / iron
JBC T245 (T245-A on JBC stations)[1][3][4]JBC also lists the T245 as a compatible handle for its C210-based CDS station.
Typical use
SMD work and high-power jobs such as ground planes[1]JBC's own description of the T245 handle.
120 V / North America
Yes: JBC sells 120 V stations, such as the CDB (CD-1BQF)[3]The CDB comes as CD-9BQF (100 V), CD-1BQF (120 V) and CD-2BQF (230 V); the cartridge is sold separately.
Compatible and clone tips
Several other brands make C245-format stations and handles[5][6]AiXun and QUICKO list stations built around JBC-style handle formats. We found no JBC statement on authorized marketplace sellers, so we call third-party tips C245-compatible.

Watch out for

  • T245 is the handle, C245 the cartridge. Check whether a listing sells a handle, a station or tips before you order.
  • JBC's figures stay with JBC. The 150 W peak rating and JBC's claim that its cartridges last up to five times longer than other brands describe JBC's own handles and stations, not third-party "C245" stations or tips.
  • C245 and C210 do not swap. C245 cartridges fit the T245 handle, while C210 cartridges fit JBC's T210, B.100 and B.500 precision handles. A station that takes both needs both handles.
  • The YIHUA 982-III's C245 version is described by the seller. A YIHUA-branded spec page lists only C115 and C210 handle packages for the 982-III, so confirm the handle and the 120 V rating in the listing before ordering.

What fits

Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.

  • 350°300°

    C245 station (120 V)

    YIHUA 982-III precision soldering station (C115/C210/C245)

    Choose the 982-III C245 set, 120 V US variant.

    A YIHUA-branded spec page documents the 982-III only with C115 and C210 handles, so the C245 set rests on the seller's description. Check the handle and the 120 V rating in the listing.

  • Knife tip (C245-K)

    HZY C245-series replacement tips

    Choose the C245-K (knife) variant.

    Third-party C245-format tip. Fit to your handle is the seller's claim, and JBC's specifications do not apply.

    Sold by TOOKKSS Store

  • Conical tip (C245-I)

    HZY C245-series replacement tips

    Choose the C245-I (conical) variant.

    Third-party C245-format tip with a fine point for small joints; the same fit caveat applies.

    Sold by TOOKKSS Store

Who it suits: benches that mix fine SMD work with heat-hungry joints such as ground planes, battery leads and shield tabs. It is the suggested system for laptop board repair, HDMI port repair and FPV drone work.

Room to grow: several C245-format stations also accept a C210 precision handle (AiXun lists T210/T245 models), and JBC lists the T245 as compatible with its C210-based CDS station, so you can add finer work later without changing station.

Questions

Is C245 better than T12?

For heavy joints it has more headroom: JBC rates its T245 handle at 150 W peak and names ground planes as a C245 job, while Hakko rates its T12 iron at 70 W. The two figures are measured differently, and for general bench work either system does the job.[1][7]

Are AliExpress C245 tips genuine JBC?

We could not confirm either way. We found no JBC statement listing authorized marketplace sellers, so we describe third-party tips as C245-compatible and do not assume JBC's quality or tip life.

Do C245 tips fit a C210 handle?

No. JBC makes C245 cartridges for the T245 handle and C210 cartridges for its T210, B.100 and B.500 precision handles. Stations that take both need both handles.[1][8]

Sources

  1. T245-A General Purpose Handle · JBC Soldering Tools · JBC T245 handle: C245/C245E/C245L cartridges, 150 W peak, intended use (SMD and ground planes), cable, compatible units. · checked 2026-10-06
  2. C245L - Longer Cartridge Range · JBC Soldering Tools · JBC C245L (longer C245) cartridges: intended uses, T245 compatibility, tip-life claim. · checked 2026-10-06
  3. CDB Soldering Station (CD-B) · JBC Soldering Tools · JBC CDB general-purpose station with T245-A handle: 100/120/230 V part codes, nominal and peak power, temperature range, tip-to-ground specs. · checked 2026-10-06
  4. CDS Precision Soldering Station · JBC Soldering Tools · JBC CDS precision station: one T210 handle for C210 cartridges (cartridge not included), 40 W tool peak, 90-450 C, versions CD-9SQF 100 V / CD-1SQF 120 V / CD-2SQF 230 V, tip-to-ground <2 ohms and <2 mV RMS, 'Ideal for soldering SMD', T245 handle listed as compatible. · checked 2026-10-06
  5. Intelligent Soldering Stations (product list) · AiXun · AiXun station list with JBC-style handle formats (T245/T210/T115/T225) and T12. · checked 2026-10-06
  6. Products · QUICKO ELECTRONIC., LTD · Quicko product catalog (T12 stations, C210/245 cordless station) and footer links to Alibaba/AliExpress stores. · checked 2026-10-06
  7. FM-2027/FM-2028 Specifications · HAKKO Corporation · Hakko T12/T15 soldering iron: 70 W (24 V), 200-450 C, tip-to-ground resistance and potential, cord, weight. · checked 2026-10-06
  8. C210 Cartridge Range · JBC Soldering Tools · JBC C210 cartridge family: compatible handles, intended work, shape groups, tip-life claim. · checked 2026-10-06
  9. YIHUA 982-III · YIHUA (yihua-gz.com, Guangzhou) · 982-III specs as published on a YIHUA-branded site: 110-240 V, C115/C210 power, temperature range, sleep. Site ownership not independently confirmed. · checked 2026-10-06

Next review due 2027-01-06.