Tip system
C210 tips: what fits, what they are good at, what to check
JBC's C210 precision cartridges fit the T210, B.100 and B.500 handles and suit small SMD work under magnification. What fits and what to check.
Also listed as T210, JBC C210, C210-compatible
We may earn a commission if you buy through links on this page, at no extra cost to you. Unless a page says otherwise, our picks come from published specifications and listing research, not hands-on testing. How we make money · How we research
Short answer
C210 is JBC's precision cartridge range for its T210 handle, also used with the B.100 and B.500. JBC rates the T210 at 40 W peak and says it suits accurate soldering with medium power needs: small SMD parts, work under a magnifying glass and conventional components. JBC sells its C210-based CDS station in a 120 V version; third-party C210-format stations exist too, but JBC's figures do not apply to them.
Key facts
- Original maker
- JBC (T210 handle, C210 cartridges)[1][2]JBC lists C210 shapes including conical, chisel, bevel, spoon, knife and conformal-coating removal.
- Rated power
- 40 W peak (JBC T210 handle)[1][3]Delivered power depends on the control unit; JBC's CDS station lists 40 W tool peak.
- Handle / iron
- JBC T210, B.100 and B.500 precision handles[2]
- Typical use
- Precision work with medium power: small SMD parts, work under magnification, conventional components[1][2][3]JBC's description; its CDS station page calls the system ideal for soldering SMD.
- 120 V / North America
- Yes: JBC's CDS station comes in a 120 V version (CD-1SQF)[3]Also sold as CD-9SQF (100 V) and CD-2SQF (230 V), with one T210 handle; the cartridge is sold separately.
Watch out for
- C210 and C245 are not interchangeable. C210 cartridges fit JBC's T210, B.100 and B.500 handles; C245 cartridges need a T245-style handle.
- 40 W is a peak figure for JBC's own handle. Third-party C210 handles publish their own ratings; a YIHUA-branded site, for example, lists 40 W for the 982-III's C210 handle and 30 W for its C115 handle.
- ESD claims belong to JBC's hardware. JBC says its T210 meets ANSI/ESD S20.20-2021, and its CDS station lists tip-to-ground under 2 ohms and 2 mV RMS. Look for published figures before trusting an "ESD safe" label on a compatible station.
- Medium power means medium. JBC positions C210 for medium power needs; for high-power jobs such as ground-plane soldering it points to its C245 system.
What fits
Product details below are the seller's own description unless a source is shown. Pick the variant named for each item.
C210 station (120 V)
YIHUA 982-III precision soldering station (C115/C210/C245)Choose the 982-III C210 set, 120 V US variant.
A YIHUA-branded site lists the 982-III at 110-240 V with a 40 W C210 handle.
Who it suits: board-level work under magnification where joints are small. It is the suggested system for phone microsoldering, USB-C port repair and SMD prototyping.
C210 or C115? JBC rates C210 at 40 W peak and the nano C115 at 25 W peak for the very smallest parts under a microscope. For a first precision bench, C210 covers more jobs; add C115 when parts get too small for it.
Questions
What is C210 best for?
JBC says the T210 handle and C210 cartridges suit accurate soldering with medium power needs: small SMD parts, work under a magnifying glass and conventional components. Its CDS station page calls the system ideal for soldering SMD.[1][3]
Should my first precision station be C210 or C245?
If most of your work is small SMD parts under magnification, choose C210. If you also solder ground planes, thick wires or big connectors, choose C245, which JBC rates at 150 W peak against 40 W for the T210. Some stations take both handles, so you may not have to choose.[1][6][4]